Kanger Evod Clearomizer Tank Review

Kanger Evod Clearomizer Tank Review

Kanger Evod Clearomizer

If you’ve been vaping for a while you will notice that one of the most important parts of an e cigarette kits is the atomizer tank. There are many different types of atomizer to choose from and finding the right one for your setup can take a bit of trial and error. Today we are hoping to make your job a little easier for you by reviewing the Kanger Evod Clearomizer tank.

The Kanger Evod Clearomizer tank is built with a bottom coil tank system that is able to handle 2ml of liquid. It is able to produce a thick warm vapour and a smooth clean flavour without causing wicking issues that are more often than not associated with this kind of brand.

The top of the Evod clearomizer has a built in mouthpiece, while the bottom comes with a replaceable atomizer tank.

These features were installed by Kanger in order to protect the user, should the atomizer fail due to some factory defect or other causes like wear and tear. It can simply be replaced without the need to replace the entire thing, including that of the remaining liquid inside the tank.

Kanger are well known for producing high quality e cigarette products and have made sure that the Evod clearomizer is easy to refill and maintain.

The tank can be refilled simply by holding the tank upside down, and unscrewing the atomizer. The clearomizer tank has a window so the user can see exactly how much e liquid the tank can hold.

What to remember:

This Kanger tank was not designed to be compatible with 510 threads. It was created for eGo batteries, like the Kanger EVOD, or the Kanger EVOD Twist. It can also be used with the Joy Ego-tank as well as the Joy Ego-C Twist and Joy Ego-C. It was also designed to be compatible with the Vision Spinner, and it will work with other brands of eGo battery.

In order to be able to use the clearomizer with a 510 threaded mod, you will need to pair it with a 510-to-eGo adapter.

Users should remember that even if the mod has eGo threads, they may not necessarily be deep enough to be able to make contact. For this reason, if you use an adapter you can be assured of a safe and satisfying vaping experience.


The tank has a capacity of 1.6 ml, and can produce a puff count of around 500 puffs. It also comes with a voltage range of 3.6 Volts to 3.9 volts, but if a 2.2ohm or higher coil is used this can be pushed higher.

How to Use:

The tube is in the centre of the clearomizer, and leads from the mouthpiece to the end of the battery. In order to avoid damaging the unit, you should avoid spilling your e liquid into the tube during the filling process. Always take care when filling your tank with e liquid and avoid spillages where possible.

When unfastening the base for refilling, the seals are temporarily broken and liquid can leak out if you’re not careful so bear in mind to keep this upside down at all times. In order to prevent problems you should wrap a cloth or piece of tissue around the Evod Tank area when unfastening the base of the clearomizer. When you have filled the tank with e liquid and take a puff, you will hear a gurgling noise. This is an indication that the liquid has found its way to the atomizer, and is a normal part of the refilling process.


All things considered the Kanger Evod Clearomizer is an excellent tank for both beginners and advanced vapers alike. It has the high quality and durability we have come to expect from Kanger, and provides an excellent full, well rounded vape.

As always, if you have any feedback or comments about the Kanger Evod Clearomizer, feel free to drop us a line in the box below.

Comments are closed here.