Innokin iTaste MVP 20W
Each year, we wait in anticipation for the next big thing in the e cigarette world. Over the decade, the field of the cigarette has undergone some drastic changes with the introduction of electronic cigarettes into the market and one of the latest products in the e-cigarette family is the iTaste MVP 20W, a modern e cigarette which we are reviewing on today’s blog.
A brainchild of the innovative production giants Shenzhen Innokin Technology, the iTaste MVP is the proud successor to the famous MVP 2.0. Although the two gadgets bear a lot of resemblance, some significant adjustments, including voltage and safety features, have been made to the iTaste MVP 20W mainly to enhance the performance of the product.
As mentioned, the iTaste MVP 20W vaporiser welcomes a wider range of Voltage and Wattage to guarantee optimum performance. The gadget has variable voltage settings that range from 3.3-7.5 volts, which can be adjusted in 0.1 volt increments. Furthermore, the wattage can be adjusted from 6.0-20.0 watts in ranges of 0.5 increments. This stands primarily as the most impressive feature of the iTaste MVP 20W since it gives the user the power to determine the rate of vaporisation.
Another power feature adjustment that has been made on the iTaste MVP 20W, is the enlargement of the battery capacity. Unlike its predecessor, the gadget houses a powerful 2600mAh polymer Li-Ion rechargeable battery that can last for about 3-5 days depending on usage. The device comes with a Micro-USB cable for charging which allows it to charge simultaneously while the user is "vaping". Interestingly, from being totally flat, it would take the device about only 3-5.5 hours to charge fully. The casing also houses an LED display that is used in indicating the different battery levels. Green shows the device is almost fully charged, yellow shows it is at half power while red signifies low power.
The iTaste MVP 20W comes with a 100% stainless steel cover that ranges in colour, from black to rugged silver, white or even green. It measures 22*41*107mm and is hence very portable. There is an on/off battery switch that is present on the case which is used in powering the device, and pressing it 3 times in quick succession powers up the device. Holding the switch down when the device is on activates the atomizer and vape. Pressing the button 3 times again in succession switches off the device.
The casing also houses an ohms meter that allows the user to read the atomizer's resistance. Even more impressive is the puff counter, which records the number of puffs a user has taken. Pressing the "P" button allows one to view the number of puffs. Some safety settings have also been added to the device. For instance, the iTaste MVP 20W monitors the battery voltage and automatically powers off when it is discharged to prevent over-discharge. The device also contains an Atomizer Protection unit which short-circuits the atomizer to stop it from functioning unsafely. Furthermore, if the activation button is held for more than 10 seconds, the vaporiser stops firing until it is released and re-pressed.
All in all, the iTaste MVP 20W is a very strong performance-oriented gadget. When its specifications are paired with its safety settings, it would be hard to think of a better device in its market. We have it on our store for £34.99 and as always we welcome any feedback or comments you may have.